Hot selling Stainless Steel 304 408 409 410 coil/plate/sheet/circle
Products | 201 202 304 304L 316 316L S 904L etc. |
Thickness | 0.1mm - 200mm |
Width | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm, 3500mm,etc |
Length | 1000mm,1219mm,1500mm,1800mm,2000mm,2500mm,3000mm, 3500mm,etc |
Thickness Tolerance | +/-0.1mm-0.5mm |
Material Grade | 201: Ni 0.8%~1% |
202: Ni 3.5%~4.5% | |
304: Ni 8%, Cr 18% | |
316: Ni 10%, Cr 18% | |
316L: Ni10%~14% | |
310S: Ni 19%, Cr 24% | |
Surface: | No.1, 2D, 2B, BA, No.3, No.4, No.240, No.320, No.400, HL, No.7, No.8,Embossed |
Payment Terms: | 1) 30% T/T in advance, 70% T/T paid at copy of B/L 2) 30% T/T in advance, 70% by L/C at sight 3) 30% T/T in advance, 70% paid after SGS inspection. |
Packing: | Bundled wooden box or bag(According to customer's requirement) |
Delivery: | 5-25 days after your deposit, or according the quantity |
Chemical composition | ||||
Grade | STS304 | STS 316 | STS430 | STS201 |
Elong(10%) | Above 40 | 30MIN | Above 22 | 50-60 |
Hardness | ≤200HV | ≤200HV | Below 200 | HRB100,HV 230 |
Cr(%) | 18-20 | 16-18 | 16-18 | 16-18 |
Ni(%) | 8-10 | 10-14 | ≤0.60% | 0.5-1.5 |
C(%) | ≤0.08 | ≤0.07 | ≤0.12% | ≤0.15 |
Outer parameter and chemical element and mechanical property:
1. Steel pipes and tubes are mostly used in structural applications.
steel pipes and tubes are available in various size and shapes based on the customer's requirements.
2. Grade: 10#-45#, A53-A369, API J55-API P110, Q195-Q345, 10#, 20#, A315, A53(A,B), API J55, API P110, Q195, Q235
3. Standard: API, ASTM, BS, DIN, GB, JIS, API 5L, ASTM A106-2006, BS 1387, DIN 1626, GB/T 3091-2001, JIS C8305-1999
Grade
201 Stainless Steel Copper content: J4>J1>J3>J2>J5. Carbon content: J5>J2>J3>J1>J4. Hardness arrangement: J5, J2>J3>J1>J4. The order of prices from high to low is: J4>J1>J3>J2, J5. J1(Mid Copper): The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc. J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting. In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting,polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility. J3(Low Copper): Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue. J4( High Copper): It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
304 Stainless Steel 304 is a versatile stainless steel that is widely used to make equipment and parts that require good overall performance (corrosion resistance and formability). In order to maintain the inherent corrosion resistance of stainless steel, steel must contain more than 18% chromium and more than 8% nickel. 316 stainless steel 316 stainless steel has excellent corrosion resistance, atmospheric corrosion resistance, and high-temperature strength due to the addition of Mo, which can be used under harsh conditions; excellent work hardening (non-magnetic). Equipment for seawater use,chemical, dye, papermaking, oxalic acid, fertilizer and other production equipment; photographs, food industry, facilities incoastal areas, ropes, CD rods, bolts, nuts. 430 stainless steel Type 430 Stainless Steel is perhaps the most popular non-hardenable ferritic stainless steel available. Type 430 is known for good corrosion, heat, oxidation resistance, and its decorative nature.It is important to note that when well polished or buffed its corrosion resistance increases. All welding must occur at higher temperatures, but it is easily machined, bent, and formed.
| Hot rolled plate | ||||
| Specification (Thick) | Big Deviation | Normal Deviation | Small Deviation | No Deviation |
| 0.4mm | 0.3mm-0.32mm | 0.33mm-0.37mm | 0.37mm-0.39mm | no less than 3.39mm |
| 0.5mm | 0.4mm-0.42mm | 0.43mm-0.47mm | 0.47mm-0.49mm | no less than0.49mm |
| 0.6mm | 0.5mm-0.52mm | 0.53mm-0.56mm | 0.57mm-0.59mm | no less than 0.59mm |
| 0.7mm | 0.6mm-0.62mm | 0.63mm-0.67mm | 0.67mm-0.69mm | no less than0.69mm |
| 0.8mm | 0.7mm-0.72mm | 0.73mm-0.77mm | 0.74mm-0.79mm | no less than0.79mm |
| 0.9mm | 0.8mm-0.82mm | 0.83mm-0.87mm | 0.87mm-0.89mm | no less than 0.89mm |
| 1.0mm | 0.89mm-0.9mm | 0.91mm-0.94mm | 0.94mm-0.99mm | no less than 0.99mm |
| 1.2mm | 1.02mm-1.08mm | 1.09mm-1.15mm | 1.16mm-1.18mm | no less than 1.18mm |
| 1.5mm | 1.32mm-1.38mm | 1.39mm-1.45mm | 1.46mm-1.48mm | no less than1.48mm |
| 2.0mm | 1.72mm-1.79mm | 1.8mm-1.86mm | 1.87mm-1.9mm | no less than1.9mm |
| 2.5mm | 2.23mm-2.36mm | 2.32mm-2.42mm | 2.42mm-2.47mm | no less than2.48mm |
| 3.0mm | 2.7mm-2.77mm | 2.78mm-2.85mm | 2.85mm-2.9mm | no less than2.9mm |
Welding
Excellent weldability by all standard fusion and resistance methods, both with and without filler metals. Heavy welded sections in Grade 201 require post-weld annealing for maximum corrosion resistance.
Machining
Stainless steel tends to work harden if machined too quickly. For this reason low speeds and constant feed rates are recommended.
If you have another question, pls feel free to contact us as below:
Q1. What is your terms of packing?
A: Generally, we pack our goods in neutral white boxes and wooden boxes,or as customers' requirements.
Q2. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages
before you pay the balance.
Q3. What is your terms of delivery?
A: EXW, FOB, CFR, CIF.
Q4. How about your delivery time?
A: Generally, it will take 5 to 7 days after receiving your advance payment. The specific delivery time depends
on the items and the quantity of your order.
Q5. Can you produce according to the samples?
A: Yes, we can produce by your samples or technical drawings.
Q6. What is your sample policy?
A: We can supply the sample if we have ready parts in stock, but the customers have to pay the courier cost.
Q7. Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery
Q8: How do you make our business long-term and good relationship?
A:1. We keep good quality and competitive price to ensure our customers benefit ;
2. We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.