Industrial stainless steel coil evaporative condenser for R717 ammonia Nh3 compressor

WELCOME Hi there,I am Darci from Casen heat transfer Co.,LTD and very glad to be at your service,Here is some brief introduction of our cooling tower system for your reference,if you need any further details,please drop a message,I will be back to you within 24 hours with a tailored proposal.You requirement has been always

Featured Products

WELCOME
 
Hi there,

I am Darci from Casen heat transfer Co.,LTD and very glad to be at your service,Here is some brief introduction of our cooling tower system for your reference,if you need any further details,please drop a message,I will be back to you within 24 hours with a tailored proposal.You requirement has been always considered as the top priority.
Have a great day and Stay safe.

Darci

Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor


Lateral flow closed circuit evaporative condenser is designed with a combined multi-modular configuration,which uses condensing coil and PVC fill for heat transfer.The principle is addressed like this: Water is pumped from ss water Tank(as auxiliary equipment to be provided if needed) or water sump and distributed over the fill.Air is induced by axial fan on top of the condenser through the fill to make water evaporating and cascading downward the coil .The coil rejects heat through both evaporative cooling through fresh air stream and sensible cooling using the pre-cooled recirculating spray water.

High temperature ammonia is circulated through the coil and heating is dissipated.The cooled water increased the temperature differential between water and R717,the heat exchange on coil surface is mainly sensible heat exchange which reduces evaporation load and and minimize the tendency to form scale on the coil.

The remaining water falls to the cooled water basin(sump) where it is recirculated by pump up through the bleed line to the upper water distribution system and back down over the fill and coil.
Features
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor

1) Heavy Duty Construction

HDG steel :Korea Posco Z720 Ultra-Galvanized SQM :720g/M2,
Stainless steel:thickness 2mm+_0.05

Steel panels is constructed of corrosion resistance,HDG or SS .

2) Low HP axial Fan Section

Carbon fiber or aluminum alloy blades and  angle index can be adjusted if needed.
Heavy duty bearing (280000 hour everage service life)
Motor:Siemens,WEG,protection class IP55,insulation class F

3)Water distribution system

Water distribution system consists of self-balance buffer chamber,water distribution pipes,large orifice,360 non-clog nozzles,drain device etc.
Pipe:PVC,HDG or stainless steel
Nozzles:ABS nozzle

4)Coil Section

Continuous serpentine shape,HDG or ss tubing constructed in a slop for easy drainage, consists of outlet headers,support and inlet&outlet piping.
Pneumatically tested at 25Bar.

6)Fill

Fills are designed with the most suitable flame retardant PVC material to give the best thermal performance,impervious to rot,dacay and biological attack.

A.standard PVC fill,good for temperature of 60 DegreeC.
B.High temperature PE fill,good for temperature of 105DegreeC.

7)Air lnlet louver

Constructed of PVC or stainless steel,corrosion resistant,wave -formed to minimize air resistance and prevent bacterial breeding caused by direct sunlight.

8)Cold Water basin

The cold water basin includes:a drain/cleanout connection,strainer,make up valve,overflow connection,anti-vortexing hood etc.The slop basin designed to avoid the formation of algae fungus in tha pan and equiped with L shape cleanout.

9)Water recirculation pump 

close-coupled centrifugal pump equiped with a mechanical seal mounted on basin,motor protection IP55,insulation class F.The pump is fabricated a bleed line with metering valve to control the bleed rate from the pump discharge to the overflow connection.

10) Drift Eliminator

The drift eliminator is formed from self-extinguishing PVC,reduce entrained water droplets from the air discharge and save water.Drift rate less than 0.002%.

Options
.
Basin heaters to anti-freezing
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor


TECHNICAL SPECIFICATIONS

I left some rough parameters of  evaporative,any specified,please share with me
ModelRated CapacityFanSpraying PumpOperation
Weight
Qty.PowerAir VolumeQty.PowerFlow Rate
RTKWm³/hKWm³/hKG
KCN-151511*1.11*1500011*1.11*361280
KCN-252511*1.11*1500011*1.11*361550
KCN-353511*1.11*1500011*1.11*362100
KCN-454522*1.12*1500011*1.11*532300
KCN-555522*1.52*1850011*1.11*532550
KCN-656522*1.52*1850011*1.11*532600
KCN-808022*2.22*2600011*1.11*533400
KCN-909011*5.51*6000011*1.51*703800
KCN-10510511*5.51*6000011*1.51*704200
KCN-12512511*5.51*8000011*1.51*705380
KCN-13513511*7.51*9000011*1.51*705800
KCN-16016011*111*12500011*2.21*1007400
KCN-18018011*111*12500011*2.21*1008200
KCN-20020022*42*5500011*31*1408700
KCN-22022022*5.52*6000011*31*1408900
KCN-24024022*7.52*9000011*41*1809200
KCN-25525822*5.52*8000011*41*1809400
KCN-27527522*7.52*9000011*41*18010500
KCN-29029022*112*12500011*41*18011900
KCN-31531522*112*12500011*41*18013350
KCN-33033022*7.52*9000021*5.51*23315000
Note: the 'Rated Capacity' based on standard condition: water inlet and outlet temp. 37-32degC, wet bulb temp. 28degC.

Project:
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor
Packaging display
Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor

About us

Since established in 2008, Casen Heat Transfer Co.,Ltd is a professional manufacturer and OEM & ODM supplier of cooling tower.
By now, our company had passed ISO9001, ISO14001 and OHSAS18001.
And we also got 21 patents and certificates of CE, PED & SGS.
Our products had been exported to more than 35 countries and enjoy a good reputation.
We look forward the next reliable cooperator from here.

Industrial Stainless Steel Coil Evaporative Condenser for R717 Ammonia Nh3 Compressor

Why choose us?

1, Over 12 Year Experience In Cooling Tower System
2, +1200 Projects Installation Finished Over 35 Countries Worldwide
3, Computer Software Calculation, Performance 110% Reliable
4, Professional Technical Team, Personal Customization Solution For You

FAQ
1, Delivery Time
    15-40days (depending on stock)
2, Shipping Type
    20"GP or 40"HQ container, installation work maximumly finished in workshop, saving     
    Installation Time and Cost.
3, Required Parameters  
    Use Purpose, Inlet Process Fluid Material, Inlet Fluid Temperature & Flow Rate,
    Outlet Fluid Temperature, Ambient Wet Bulb Temperature and Local Power Details

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours