E316LT1-1
Stainless steel flux cored welding wires E316LT1-1
1. Type: AWS E316LT1-1
2. Size: 1.2, 1.6mm
3.Polarity: DC+
Chemical composition of the deposited metal (%):
Mechanical properties of the deposited metal:
Feature:
1. E316LT1-1 is a rutile type flux cored wire for low carbon 18%Cr-12%Ni-2%Mo stainelss steel. It is used for all position welding to be used with CO2 or Argon + CO2 mixed shielding gases. This wire recommended for high deposition rates in the flat and horizbontal position..
2.Usage:316 and 316L
3.Welding Temperature: Less or equal to 350 degrees Celsius.
4.Welding position: It is suitable for all position.
Notice:
1. Wire shall be stocked in dry. Open the packs just when welding to avoid the wire rust.
2. Before welding please clean out the oil, rust, water etc from the work parts.
3. Must use pure CO2
Specifications:
1. soft and stable arc
2. beautiful appearance of weld. good slag detachability
3. fewer spatters
1. This product is a kind of stainless steel gas-shielded flux-cored welding wire.
2. It has excellent welding performance.
3. All-position welding.
4. It is used for welding 16 and 316L Stainless steel
5. Shielding gas: 100% CO2
Stainless steel flux cored welding wires E316LT1-1
1. Type: AWS E316LT1-1
2. Size: 1.2, 1.6mm
3.Polarity: DC+
Chemical composition of the deposited metal (%):
| C | Mn | Si | Cr | Ni | Mo | P | S | |
| Standard Value | ≤0.04 | 0.5-2.5 | ≤1.0 | 17.0-20.0 | 11.0-14.0 | 2.0-3.0 | ≤0.04 | ≤0.03 |
| Example Value | 0.027 | 1.25 | 0.38 | 18.57 | 11.35 | 2.28 | 0.03 | 0.004 |
| Yield Strength(MPa) | Tensile Strength(MPa) | Elongation (%) | Impact Value J(°C) | |
| Standard Value | ---- | ≥485 | ≥30 | ---- |
| Example Value | ---- | 550 | 43 | 40/-196 |
1. E316LT1-1 is a rutile type flux cored wire for low carbon 18%Cr-12%Ni-2%Mo stainelss steel. It is used for all position welding to be used with CO2 or Argon + CO2 mixed shielding gases. This wire recommended for high deposition rates in the flat and horizbontal position..
2.Usage:316 and 316L
3.Welding Temperature: Less or equal to 350 degrees Celsius.
4.Welding position: It is suitable for all position.
Notice:
1. Wire shall be stocked in dry. Open the packs just when welding to avoid the wire rust.
2. Before welding please clean out the oil, rust, water etc from the work parts.
3. Must use pure CO2
Specifications:
1. soft and stable arc
2. beautiful appearance of weld. good slag detachability
3. fewer spatters
1. This product is a kind of stainless steel gas-shielded flux-cored welding wire.
2. It has excellent welding performance.
3. All-position welding.
4. It is used for welding 16 and 316L Stainless steel
5. Shielding gas: 100% CO2